(basically this name has been used at the time of coding) Navigate to Question tab at the bottom, Give Question name (it is basically a label name displayed in the form), after giving question and pressing the tab key, Name field auto populated or you can also give it by yourself.Give order (let say give value 100, basically order decides the sequence of display, field having the minimum order number will display on the top of the form).Give Type (for example: for requested field, choose reference type.Click on new button available in Variable tab. Now lets create field such as Requested For.Open Variable Tab ( variable is basically used to create the fields, fields which are available in the form).Once the form get saved, below related list will appeared. Provide description and short description, want to display on Catalog Item.Navigate to Maintain Item module available on left side modules list.
Other blogposts on the D7 are on NanoDLP, Manual and general review of the printer.Below is the complete explanation of all three things required to create catalog item in servicenow.ĭesign Service Catalog Item Form: Steps to develop form of Catalog item in ServiceNow :
The handling of the profiles is rather cumbersome.Īnother serious problem is this setup, if you want to use more than one D7, because then several printers have to be juggled at one computer with several CW instances, which is not only awkward, but also carries a big risk that prints break off.ĬW is a viable tool for the D7, as long as only a 3D printer with few resins is to be controlled and the PC has sufficient computing power and has been set so that no communication interruptions occur during printing between PC and D7.
These also contain the machine code (G-Code), which controls the printer over the printing process. These contain the information for the exposure times and the layer thickness of the model. The slice profiles are another shortcoming. Often a laptop had to be restarted hard because CW swallowed more computing power for slicing than was provided by the PC. You can switch it all off manually, but especially at the beginning you are frustrated if you don’t know that and try to print the screen saver.Ĭomputing power when slicing and printing profilesįurthermore, a large model requires a lot of computing power from the computer, otherwise the display, the slicing of the model or the use of the computer at all will fail. Also, screensavers or other interventions of the system on the graphic connection to the controller of the 3D printer are unfortunately a dangerous matter.
Operating the CW during 3D printingįirst of all, the computer must be connected to the printer for the entire print time, a Windows update that restarts the computer interrupts and destroys the print.
Despite the fact that Wanhao brought CW closer to the hardware as a company integration in 2018, the software has certain technical limitations which are described below.
The problems which CW raises become however fast clear if one wants to print then also large models with long printing times. Because the computer takes over representation, modelling and also the generation of support structures.
As an operator, you have also quickly put the device into operation. Wanhao itself recommends Creation Workshop CW for Wanhao D7. Of course, the question arises how these can be configured via software. The Wanhao D7 offers in contrast to many high-priced printers the possibility to process a wide range of resins. CW (Creation Works) on the Wanhao D7 Assessment from the user’s point of view